These gauges are constructed with a solid forged steel bar main chamber and cover plates recessed to have perfect alignment of gaskets and glass. Though rated for 2000 psig. these are light weight and hence do not need any combursome supports for medium lengths. With special main chamber construction these gauges can be supplied upto 3000 psig. Main Chambers are available in C.S, M.S, SS304, SS316, P.P., P.V.C., FRP and Rubber lined. Gaskets are of CAF, GRAFOIL, TEFLON, NON-ASVESTOS, etc.

Our range of liquid level indicators are designed to provide high clarity indication of liquid level. The float-containing magnet in the indicator rises and falls with the liquid. As the float moves, this information is transferred to the indication rail mounted on the outside of the tube. The white and red indication flaps represent air and liquid level respectively. Liquid level is also indicated by follower - Magnet type indicator.

Our highly accurate remote level indicators help to keep a track on the displacement of the water levels in the boiler. When the water levels in the boiler rises, the increasing water column presses the red indicating liquid (sealing liquid) from the first phase into second phase and then indicates in the Inspection glass of the indicator. The water displaced from Phase one flows from the condenser into Phase three and then into the boiler. If the water level in the drum falls, then the indicating liquid in phase three in the inspection glass, falls correspondingly. The water vapor formation in the condenser takes place when the water level in phase three is constantly filled up.

Filling and air Relief Plug
Condenser
Screw Joint
Main shot off Valve (Steam)
Equalising Tube
Main Shot off Valve (water)
Screw Joint
Connection Pipes
Indicator Shot off Valve
Indicator Shut off vlave
Cleaning Plug of Valve
Cleaning Plug Inspection Clean
Requlating Valve

BCO - Offset Connection Tubular gauges Our BCO tubular gauges are superior in quality that are manufactured with a pair of auto shut off ball check valves with offset and union construction. Because of their simple design, and their ability to work without additional isolation valves they can be installed very easily and cost-effectively. The innovative offset construction of the valves enables glass tube's to be replaced while in use. Whenever the glass tube breaks the ball check arrangement automatically closes the valve seat and prevents wastage of any fluid. Glass tube protection in the form of " Tie Rods" or "Pipe Shield" is provided.

HDO Heavy Duty Channel Protector Gauges Our highly effective tubular level gauges come with heavy wall glass tubes with 3 mm thick machine made channel protector. Designed to endure extreme conditions these valves offer very high durability.

Our superior quality transparent level Indicators are equipped with heavy valve glass tubes fitted. These valve glasses are fixed with a heavy duty metallic frame, which is made from min. 3mm thick channel box type protectors. We can also provide auto-shut-off ball check, needle or ball valve isolator as an integrated part with these indicators, if required.
These are designed specially to endure to extreme conditions and they can easily withstand alignment stress. Our premium indicators are available in two varied models : Side Mounted type and Top Mounted type.

Highly efficient, our float and cord level indicators are perfectly aligned and come with a pulley and scale. Our float and level indicators are highly suitable for outdoor usage, as they use dust proof pulley housing. Spring Tensioning assembly is also provided additionally for guide wires. The floats available by us can be custom designed as per specific industrial requirements. 

For all types of Storage Tanks.
Perfectly Aligned guide wire, pulley and scale.
Ideal for outdoor installations. Cast Aluminum Pulley Housing.
Spring Tensioning assembly for Guide wires.
Float available of various desired designs and materials as per applications

Our dipsticks are made of superior quality Non Sparking material with calibrated scale for fast and accurate measuring of the fuel level. These equipment are designed for the personal safety of the person inspecting the tank. For measurement, simply dip the stick in the tank and the fuel level can be read off against the calibrated scale on the side of the dip stick.

Stainless Steel Tape in range of 5 M, 8 M, 10 M, 15 M, 20 M and 30 M standard lengths. The assembly consists of a brass weight tape spool and handles for holding the assembly and retracting the tape. 

Fluidyne DIP TAPE ASSEMBLY is suitable for measurement of Tank and Vessel Level of oil and other comparable liquids.

Specifications :

Material:cloth tape
Use:Carton Sealing
Adhesive Side:Single Sided
Adhesive:Rubber
Adhesive Type:Hot Melt, Pressure Sensitive
Feature:Waterproof
Design Printing:No Printing
Place of Origin:Mumbai
Brand Name:Fluidyne Inst. pvt ltd
Material:nylon cloth
Adhesive:one sided
Color:black
Service:OEM
Price:reasonable
Quality:good
Appliance:for making shoes
Packaging Delivery
Packaging Details:plastic bag and carton
Delivery Detail:15-20Days

Weldneck, screwed, slip-on forged flanges. Flange taps, vent and drain. Orifice plate of SS, Monel with tag. Plat design as per B.S./A.P.I. Std. H.T. Bolts and Nuts. Jack screw provision.

Available in Flanged, Screwed and Pad types. Double/Single Window Full View, Angular. Rotating wheel, Flapper and Dip tube design. S.S.C.I, C.S, Bronze, P.V.C, P.P, Lining of Rubber, Teflon, Lead, F.R.P. Plain and Reflex gauge glass. Toughened Borosilicate, Moulded, Pyrex. Rectangular, Round, Cylindrical. Peep-hole glasses with mica for high temperature. Pad mounted-Round/Rectangular.

Manometers, industrial manometers are used in various industrial application for pressure and vacuum measurements. Manometers and industrial manometers are also used for flow measurement techniques. They are available in wall-mounting or pedestal type and 'U' tube or single limb type. The manometers, industrial manometers may be of inclined type or provided a vernier scale for obtaining greater accuracy.

The normal accuracy of the manometer is 1 mm but by providing a inclined tube 0.1 mm or better accuracy can be obtained. A movable vernier can further provide a readability of 0.1 mm. Gradiations in inches and cms are Standard Special type of Scales can be provided to take care of specific requirements, 

We have pleasure in introducing our superior variable area flow meters and rotameters and industrial rotameters with special types offered for general industrial service and instrumentation requirements. Glass tube rotameters are offered where general flow measurements are within the limitations imposed by pressure rating of the glass metering tubes. For higher pressure ratings we offer metal metering tubes. Rotameters and industrial rotameters manufactured are of panel mounted types as well as pipe line mounted types. The pipeline mounted instruments are constructed to withstand pipeline installation stress, strain and vibrations. The unique gland arrangement ensures zero leakage and long life to the metering tube.

Plunger-Flapper-Paddle-Diaphragm Types. Magnetic Glandless Switching. Micro Switch, Mercury and Air break type. Flanged, screwed connections. For Alarms, Tank overflow and motor control. Special design to: vertical/ horizontal flow. Level switch -Nine types for every application. Internal, external, side and top mounted. Micro Switch-Mercury, air break and air Valves. Operating Alarms, Motor Control, Level Control, Snap Action contacts with NO/NC contacts. Float operated Magnetic and Glandless.

FLUIDYNE MAGNETIC & BELLOWS SEALED flow switches are versatile instruments designed to handle any fluid. Standard materials of construction and glandless design offered render the switches compatible with most of the corrosive and toxic fluids. The easy-to-fix design reduces installation costs and time. Simple mechanical parts ensures high reliability and zero - failures. The microswitch of the instrument is operated by the deflection of paddle or plunge assembly due to velocity of flowing-fluid against the restraining force of the range spring through a magnetic scaled lever at a predetermined flow rate.

FLUIDYNE switch also senses flow - no flow, responding only to the velocity of fluid movement in a duct.They provide a positive signal to detect change or loss of flow velocity caused by closed damper, a loose fan wheel, a slipped or broken fan belt, a dirty or clogged filter or even an overload to fan motor. Large paddle are used for reliable velocity switching.

GENERAL SPECIFICATION:

Line size: 15mm to 1000mm (N.B.).
Mounting: vertical or horizontal pipe.
Range: refer table for standard range.
Repeatability / Accuracy: +1-5% of Maximum flow.
Process Connection: BSP/NPT for threaded versions,
                     (1" or 1.1/4" NB) ANSI # RF for flanged versions,
                     1/2" to 12" pipe threads for integral,
                     tee versions, special Sizes as per customer request.
Maximum Line Pressure: 10 bar for brass body.
                     30 bar for SS BODY ( higher rating available on request upto 300 bar
                     1 bar for duct mount version.
Maximum Process Temperature: 170 Deg.0 for brass body.
                     200 Deg.0 for SS body.
Pressure Loss: 60 to 80 m bar at maximum flow.
Mounting: vertical or horizontal pipe.
Switching: snap acting SPCO, (SPDT), DPDT
                     microswitch rated 5A, 230V AC or 10A, 230V AC.
Dead Band: 5 to 10% of maximum flow ( 10% at min. set valve
                     & 5% at max set valve ).
Enclosures: pressure die cast aluminium weather proof to I.P. :65 &
                     flame proof to Gr. 11 A & 118 of IS : 2148: 1981, on request.

Sensitron Thermocouples and wells are designed for making available to the industry a complete range of thermocouples for measuring temperatures from 150°C to 1600°C and, are highly accurate and sensitive. These thermocouples are offered with a very wide range of thermowells of different materials to suit the application.

Basically, a thermocouple is composed of two dissimilar metal wires butt welded together in a circuit. The circuit develops a small EMF, in accordance with See back effect, between the measuring and reference junctions. This EMF can be measured by means of any pyrometer in terms of temperature. 

Sensitron Thermocouples are fabricated by gas or arc welding or resistance welding in accordance with ISA recommendations.

Fluidyne manufactures and supplies all type of UV,FR and PR flame sensors. Fluidyne 'UV SENSOR' for oil and gas Flames Sensor flame or fire in the vicinity and sends signal to UV Flame Amplifiers. These sensors are suitable for detecting flame in chemical, petrochemical, power and pharmachemical industries and also suitable for residential or commercial establishments. Fluidyne manufactures all types of ultra violet flame sensors for oil and gas flames; Photo Resister Flame Sensors is suitable for oil flames. Fluidyne manufactures special sensors for other crictical applications. Quartz Glass protection Sheild is also supplied for these UV, PR, FR Flame Sensors.

Fluidyne Flame Amplifiers, Controllers, and Relay Model FFA-100 is a stand alone unit of ABS plastic molded body with two potential free relay contacts rated for 5A, 240V AC that can be used for alarm indication or safely-interlock purpose. The Fluidyne Flame Controller Amplifier Relay has an in- built switch-off time delay of 2 second in case of transient flame. The Fluidyne Flame Amplifier Relay works with Fluidyne make Flame Sensors as well as other makes and models. The rating of Fluidyne UV tube Flame Sensors should be 230V AC rms (325V DC peak). Fluidyne Flame Sensors can detect weak UV radiation in narrow bad around 260 nm and is not sensitive to visible light or infarred radiation, having quick response of about 40 milli seconds, with very high reliability and long life of over 20,000 hours. Fluidyne Flame Sensor and Amplifier Controller Relay is suitable for GAS, OIL , COAL, Electric ,LPG and CNC Flames. 

Fluidyne Flame Amplifiers, Controllers, and Relay Model FFA-100 is a stand alone unit of ABS plastic molded body with two potential free relay contacts rated for 5A, 240V AC that can be used for alarm indication or safely-interlock purpose. The Fluidyne Flame Controller Amplifier Relay has an in- built switch-off time delay of 2 second in case of transient flame. The Fluidyne Flame Amplifier Relay works with Fluidyne make Flame Sensors as well as other makes and models. The rating of Fluidyne UV tube Flame Sensors should be 230V AC rms (325V DC peak). Fluidyne Flame Sensors can detect weak UV radiation in narrow bad around 260 nm and is not sensitive to visible light or infarred radiation, having quick response of about 40 milli seconds, with very high reliability and long life of over 20,000 hours. Fluidyne Flame Sensor and Amplifier Controller Relay is suitable for GAS, OIL , COAL, Electric ,LPG and CNC Flames.